点击图片查看大图
1 产品特点
该产品自吸空气和矿浆。槽体为前倾式，不易沉槽，利于泡沫前返；采用双叶片叶轮，对底部粗砂有良好搅拌作用；该型浮选机特点：吸气量大，能耗小；水平布置，不需泡沫泵；叶轮圆周速度低，叶轮盖板寿命长，矿浆按固定方式进行上、下双循环，有利于粗矿物悬浮。
2 选用说明
2.1订货时除注明型号数量外，必须提供浮选流程，提供以下内容
①配置方案及给矿方式
②刮板数量和传动方式（右传动、左传动）
③给矿箱、中间箱、原矿箱数量
④其他特殊要求
2.2不提供电器控制柜
2.3闸板按生产厂图纸生产，大型浮选机采用电动闸板。
1 Product Features
This product can imbibe the air and ore pulp spontaneously. The tank is forward, not liable for precipitation into the tank but facilitates returning of the foams. Its double-blade impeller can agitate the coarse sand at the bottom adequately. It has the following features:large air suction amount, low energy consumption, horizontal arrangement, no foam pump required, low peripheral velocity of the impeller, long service life of the impeller cover plate. Upper and lower double circulation of the ore pulp is in a fixed way, which is conductive to the suspension of coarse grain minerals.
2 Notes for Selection
2.1 While placing your order, in addition to specifying the model and quantity, make sure to provide the flotation circuit and the followings:
①Configuration scheme and feeding mode
②Quantity of the scrapers and mode of drive(right drive or left drive)
③Quantities of feeding chambers, intermediate chambers, and crude ore chambers
④Other special requirements
2.2 No electric control cabinet will be supplied.
2.3 The flashboard will be made according to the manufacturer’s drawings. And the electric driven flashboard will be adopted for large-scale flotation machine.